What's Included in the Hardware Kit?

• A) Infinity Glass Whiteboard
• B) Accessories Tray
• C) Metal Threaded Standoff Caps
• D) Washers (2 Washers per Hole)
• Eastward) Phillips Head Screws
• F) Self-Drilling Drywall Anchors
• G) Metallic Threaded Standoffs

What Else Do I Need?

• Pencil
• Level
• Phillips Head Screwdriver
• Power Drill

Step 1– Set for Installation

• Brand sure yous take plenty people to install your board. We recommend two people for smaller boards and iii+ people for 72" x 48" and 96" x 48" boards.
• Place the Glass Whiteboard (Role A) against the wall in the desired installation location.
• Identify a level on acme of the board to ostend it is level.
• Utilize a pencil to marker an "x" in each mounting hole.
• Pro Tip - Only apply a pencil when marking the holes. Read our helpful whiteboard installation tips to find out why.

Step 2-5 – Insert Wall Anchors

• Advisedly remove the glass whiteboard from the wall and place it in a safe spot.
• Use a 7/32" drill bit to create the pilot hole.
• Insert a Self-Drilling Drywall Ballast (Part F) into each of the "x" marks using a Phillips Head screwdriver. Plough clockwise until the head of each anchor is affluent with the wall.

Stride vi-7 – Install Standoffs

• Place a Collision (Part G) over each drywall ballast. Insert a Phillips Head Spiral (Part Due east) through the standoff, into the anchor and tighten.
• The spiral should concord the standoff tightly against the wall, echo this process for all standoffs.
• Make sure all standoffs are flush against the wall before proceeding.

Footstep 8 – Install Glass Board

• Place Washers (Part D) on the threaded section of each metallic Standoff Cap (Function C). Lift glass whiteboard and align holes with the Standoffs (Office G) on your wall.
• For glass whiteboards 48" ten 36" and smaller: Place a washer behind the drinking glass lath before screwing the metal standoff cap into the barrel.
• Once all washers are in place: Insert Standoff Caps (Part C) through the whiteboard and into the Barrels (Function 1000).
• Turn caps clockwise until they are virtually tight against the glass dry erase board. Repeat steps for all standoffs.
• Fully tighten Standoff Caps once they are all in identify.
  Make sure the standoffs are flush against the board surface.

Step 9 – Attach Accessory Tray

• Starting at an angle, press the Accessories Tray (Office B) up along the bottom of the glass whiteboard.
• The drinking glass should fit between the gap in the back channel of the tray.
• Button the tray upward until the bottom of the back channel is fully confronting the glass.

Ready to Write!

You lot're now ready to beginning using your glass marker lath! Keep your thoughts organized and ideas flowing on the beautifully designed, frameless drinking glass surface. Our Infinity boards are easy to erase, while our dry out-erase markers help y'all create assuming writing. If you take a magnetic glass board, hang upward reference documents and reminders for like shooting fish in a barrel viewing. Personalize the way you use your glass whiteboard to spark your creativity!

Take More Questions?

If you take further questions, please feel free to contact united states of america. You can also download a copy of your manual and visit our Quartet Infinity Glass Dry-Erase Boards folio for more than information on the Infinity line.